GISATEX® AMAREE LEDRO AUTOADHESIVE marine headlining

Areas of use

Marine headlining material GISATEX® AMAREE LEDRO Auto Adhesive Professional is a self-adhesive technical textile which can be used in a wide variety of conditions. Its microfibre surface is matt and very soft, suitable for lining indoor walls or covering furniture bases. The material is easy to clean, extremely flexible and resistant to tearing.

Qualities

GISATEX® AMAREE LEDRO Auto Adhesive Professional is highly abrasion resistant and withstands both high and low temperatures. It adheres instantaneously to all non-absorbent surfaces and requires no drying time.

Instructions for use

Ensure a dry, grease and dust-free surface. Processing temperature should be min. + 10 °C. Slowly remove the foil on the back (adhesive cover) and apply the material to the surface to be covered, avoiding the formation of bubbles

Care

Clean the surface only with a soft brush or with a GISATEX® OC micro-fibre sponge. Do not apply cleaning agents containing solvents. Remove stains with water and gentle soap and allow to air dry. Do not dry with hot air or attempt to clean with a steam cleaner.

Domaines d‘utilisation

GISATEX® AMAREE LEDRO Auto Adhesive Professional est un matériau de revêtement mural élégant et robuste pour l‘intérieur des bateaux. Son agréablement doux, respirant. La surface en microfibre le rend particulièrement adapté à une utilisation dans les cabines.

Qualités

• auto-adhésif
• matériau supérieur à base de 100% PES
• surface extrêmement insensible à la saleté
• cycles d‘abrasion élevés

Note de traitement

Surface sèche, sans graisse et sans poussière. Température de traitement min. + 10 ° C Retirez le film sur le dos pas à pas. Appliquer le matériau sur la surface à recouvrir. Éviter la formation d‘air et de bulles.